Avanti SWC1600M1 Instruction Manual download pdf (Page 7)

OPERATING YOUR WINE CHILLER

It is recommended you install the Wine Chiller in a place where the ambient temperature is between

23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended temperatures, the

performance of the unit may be affected. For example, placing your unit in extreme cold or hot

conditions may cause interior temperatures to fluctuate. The range of 8º-18ºC/46º-64ºF may not be

reached.

Recommended Temperatures for Chilling Wine.

Red Wines

14º - 18º C

57– 65º F

Dry/White Wines

9º - 14º C

49 – 58º F

Rose Wines

10º - 11º C

51 – 53º F

Sparkling Wines

5º - 9º C

40 – 49º F

Temperature Ranges For Your Wine Chiller

Temperature Range

8 - 18º C

46 – 65º F

CONTROL PANEL

 SETTING THE TEMPERATURE CONTROL

 Push the button for 3 seconds minimum to start your wine cellar.

 Push the button before setting the temperature.

 Your Wine Cellar has been equipped with an “automatic” control panel lock, that will activate 12

minutes after the last time a button has been touched

Push the and button simultaneously for 3 seconds to unlock the control panel. You will

hear a “BEEP” sound to alert you that the control is now active

 You can set the temperature as you desire by pushing the or button on the control

panel for each zone. The temperature that you desire to set will increase 1ºF or 1ºC if you push

the button once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the

button once.

 After a power failure, control functions will be locked for up to 5 minutes. To reset, press the “ON”

button and start operation as normal. After 5 minutes unit will automatically turn on and revert to

the factory default setting.

 When you store mostly red wines, the temperature needs to be set at between 14º - 18ºC (57º -

65ºF). The indicator marked “RED” will light up in Green

 When you store mostly white wines, the temperature needs to be set at between 9º - 14ºC (49º -

58ºF). The indicator marked “WHITE” will light up in Green

You can select temperature display setting from Fahrenheit to Celsius degree by pushing this

button. (Fahrenheit or Celsius indicator will appear in green color) The degrees will appear in blue

color in the temperature display window.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

Avanti SWC1600M1 Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Unknown Avanti SWC1600M1