Avanti FF760W Instruction Manual download pdf (Page 10)

OPERATING YOUR APPLIANCE

¾ Temperature Control Panels

Refrigerator Temperature Control Freezer Temperature Control

¾ Setting the Temperature Control

• To control the internal temperature, adjust the control dials according to the ambient temperature or

purpose of use.

• The first time you turn the unit on, set the temperature control to “MAX” in refrigerator section and

“MAX” in freezer section.

• The range of the temperature control is from position “MIN” the warmest to “MAX” the coldest in

refrigerator section and from position “MIN” the warmest to “MAX” the coldest in the freezer section.

After 24 to 48 hours, adjust the temperature control to the setting that best suits your needs. The

setting of “MED” in refrigerator section and “MED” in freezer section should be correct for home or

office refrigerator use.

NOTE:

 IF THE UNIT IS UNPLUGGED, HAS LOST POWER, OR IS TURNED OFF, YOU MUST WAIT 3

TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU ATTEMPT TO RESTART BEFORE

THIS TIME DELAY, THE REFRIGERATOR-FREEZER WILL NOT START.

 TURNING THE REFRIGERATOR TEMPERATURE CONTROL TO “OFF” POSITION STOPS THE

COOLING CYCLE BUT DOES NOT SHUT OFF THE POWER TO THE UNIT.

USE OF THE ICE CUBE TRAYS

• For your ice requirements, fill approximately ¾ of the tray after washing it.

• Slide the tray onto the ice cube shelf.

• Remove the ice cubes from the ice cube tray by twisting the ice tray knobs. Make sure the ice

cube container is beneath the ice cube tray. (See diagram below.).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

No comments

Avanti FF760W Instruction Manual Page 10