Avanti Air Conditioner User Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
the floor or rebending exhaust pipes was a major
factor for me.I don’t plan to thrash the car at the
drag strip; however the fact that the 200 was the
standard transmission for the Buick Regal V6 Turbo
seemed to indicate that it wasn’t a lightweight.
Further,Iplanned
tobuya remanufacturedunit, soI
would be assured that the internals were all
updated, properly assembledand working well, and
wouldcarryaguaranteebesides.
I chose to buy my transmission from Bowtie
Overdrives in Hesperia, California, based on my
research and the many positive comments I
encountered
during my search. Aiding my decision
was the fact that they are clearly accustomed to
dealing with a hobbyistmechanic like me, one who
knowshiswayaroundashopandhasgoodtoolsbut
who doesn’t install transmissions for a living. Their
online guides alone are a gold mine of
reference
information during the selection process.
(www.bowtieoverdrives.com
)
Myers Studebaker Parts provided the various
important items needed to mate the GM
Transmissions with the Studebaker engine.Jon
Myers’sonMikeistheinhouseexpertonthisswap,
and he willingly helped me by telephone several
times during the conversion when I was unsure of
myself.The same
adapter plate works with both
transmissions.(www.myersstudebaker.com
)
DoItYourselfInstallation?
I would rate this job as one that only the most
confidentdoityourselferwouldtryathome.While
no true “engineering” is required of the installer,
and all special parts have already been made,
(exceptingthecarburetorThrottleValvecablelever)
considering the logistics of removing an engine or
transmission,thisisnotaneasyjob.
Several specialized tools are needed for this job,
including an engine lift and/or a suitable
transmissionjack,andIwouldn’ttrytodoitwithout
a good setof ½” sockets, some in large sizes, and a
torquewrench.
Ifdecidingtohave
ashopdothiswork,youwillneed
tofind an agreeableandadventurous shopthatwill
workonatimeandmaterialsbasis.Givingthemthis
article to read before asking would probably help
convince them that it is not that difficult. Expect to
payfortwofulldays’of
laborforajobthatdoesnot
include completely removing the engine as I have
done.
Removingtheold
Mostwillsaythatthefareasierwaytodothisjobis
from underneath, removing only the transmission
and torque converter while leaving the engine in
place.I’dprobablyagree,aslongasyouhaveaway
toraisetheentirecaratleast18inchesoffthefloor
and
have a suitable transmission jack. Regular floor
jacks are not designed to balance an automatic
transmission, and many don’t elevate high enough
for the extraction. Harbor Freight
(www.harborfreight.com
) sells a reasonably priced
transmissionfloorjackforthisjob.Theyalsohavean
automatic transmissionsupporting attachment that
willworkwithsomeregularfloorjacks.Itlookslikea
Page view 2
1 2 3 4 5 6 7 8 ... 11 12

Comments to this Manuals

No comments