Avanti EWC18N2PD Instruction Manual download pdf (Page 10)

OPERATING YOUR WINE CHILLER

It is recommended you install the Wine Chiller in a place where the ambient temperature is between

23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended temperatures, the

performance of the unit may be affected. For example, placing your unit in extreme cold or hot

conditions may cause interior temperatures to fluctuate. The range of 8º-18ºC/46º-64ºF may not be

reached. The default temperature set at the factory is 12ºC / 54ºF.

Recommended Temperatures for Chilling Wine.

Red Wines

14º - 18º C

57– 64º F

Dry/White Wines

9º - 14º C

49 – 58º F

Rose Wines

10º - 11º C

51 – 53º F

Sparkling Wines

8º - 9º C

46 – 49º F

Temperature Ranges For Your Wine Chiller

Upper Zone

8 º - 18º C

46 º – 64º F

Lower Zone

12 º - 18º C

54 º – 64º F

 CONTROL PANEL

 SETTING THE TEMPERATURE CONTROL

 Upper zone and bottom zone are each controlled separately

 Your Wine Cellar has been equipped with an “automatic” control panel lock, that will activate 12

seconds after the last time a button has been touched.

Push the and button simultaneously for 3 seconds to unlock the control panel. You will

hear a “BEEP” sound to alert you that the control is now active.

 You can set the temperature as you desire by pushing the

button on the control panel for

each zone. The temperature that you desire to set will increase 1ºF or 1ºC if you push the

button once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the button

once.

You can select temperature display setting from Fahrenheit to Celsius degree by

pushing this button approximately for 3 seconds. The degrees will appear in blue

color in the temperature display window.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Avanti EWC18N2PD Instruction Manual Page 10