Avanti EWC18N2PD Instruction Manual download pdf (Page 12)

 Energy Saving Tips

• The Wine Chiller should be located in the coolest area of the room, away from heat producing

appliances, and out of the direct sunlight.

• One characteristic of superconductor units is the length of time it requires to recover from having

the door opened and shut frequently. It may be necessary to wait longer for the temperature to

return to its former level once the door has been opened for too long. This is normal for this type

of unit.

PROBLEMS WITH YOUR WINE CHILLER?

You can solve many common Wine Chiller problems easily, saving you the cost of a possible service

call. Try the suggestions below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE

Wine Chiller does not operate or cool.

Not plugged in.

The circuit breaker tripped or a blown fuse.

Control panel is locked

Push the and button simultaneously for

3 seconds to unlock the control panel.

Wait for beep sound.

Wine Chiller is not cold enough.

Check the temperature control setting.

External environment may require a higher

setting.

The door is opened too often.

The door is not closed completely.

The door gasket does not seal properly.

The Wine Chiller does not have the correct

clearances.

Abnormal voltage.

The light does not work.

Not plugged in.

The circuit breaker tripped or a blown fuse.

The light button is “OFF”.

Vibrations.

Check to assure that the Wine Chiller is level.

The door will not close properly.

The Wine Chiller is not level.

The door was not properly installed.

The gasket is dirty.

The shelves are out of position.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Avanti EWC18N2PD Instruction Manual Page 12