Avanti CF103 User Manual download pdf (Page 30)

30 AVANTI Work Cage for Wind Turbines

Fig. 18 Wire diameter

Fig. 19

Wire strap/loop,

which cannot be

unwound

Loop knot forming

when a wire loop is

pulled tight

Bends resulting from

inappropriate treatment

(e.g. securing the load

with the wire)

Damage resulting from

crushing, squeezing,

running over, etc.

Wire bags

Loop formation

12.1.5 Overload limiter/information

signs

Annual test:

Test switches as speciﬁed in User’s Manual

section 5.3 and 5.4. (page 18 ff.)

Perform overload test as speciﬁed in Installation

Guide section 4.c) page 48)

Verify completeness and legibility of all rating

plates and information signs. Replace missing

or illegible plates and signs!

12.2 Repairs

Repairs to traction hoist equipment may ONLY

be performed by the manufacturer or a hoist

service centre, and only using original spare

parts.

If the gearbox oil needs to be replaced, use one

of the lubricants speciﬁed in the following table,

corresponding to the temperature range in

which the traction hoist equipment is used.

Amount required:

traction hoist LE500P: 1.4 l.

See table 4.

Temperature 5ºF to 176ºF -31ºF to 104ºF

range (-15ºC to 80ºC) ( -35ºC to 40ºC)

Synthetic oil

API speciﬁcation CLPPG or CLPPG or

PGLP ISO VG 460

PGLP ISO VG 100

Oil speciﬁkation Klübersynth Klübersynth

GH6 460 GH6 100

Use of other synthetic oil only with

approval by AVANTI.

Standard ﬁlling

Table 4

Fig. 20

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 63 64

Comments to this Manuals

No comments

Avanti CF103 User Manual Page 30

Comments to this Manuals

Related products and manuals for Unknown Avanti CF103