Avanti CF103 User Manual download pdf (Page 51)

Installation Manual 51

CAUTION!

Wear protective gloves

when handling wires.

2.5.1 Drive wire installation

a) Remove protection guard above rollers

b) Feed the wire through the roof into the trac-

tion hoist’s wire inlet opening. (Right side

seen from front of work cage).

c) Push the UP button on the pendant control

and feed wire through until the traction hoist

starts pulling. Ensure that the wire can exit

without obstruction!

d) Continue feeding the wire underneath

(round) the front guide wheel, over the back

guide wheel, and through the back panel.

e) Let the lift wire pass through until it is slightly

tightened.

f) Replace roller protection guard.

g) Feed wire through platform ﬂoor.

2.5.2 Safety wire installation

a) Remove protection guard above rollers.

b) Open the safety brake gripping device by

pushing down the lever until it engages/clicks

(Fig. 16 page 23). Feed the safety wire through

the roof hole above the safety brake and con-

tinue by feeding through the safety brake.

c) Like the lifting wire, continue feeding the wire

underneath (round) the front guide wheel,

over the back guide wheel, and through the

back panel.

d) On the back of the work cage pull the safety

wire to tighten it.

e) Replace roller protection guard.

f) Feed wire through platform ﬂoor.

Fig. 12 Back side

Drive wire Safety wire

Ensure that the

wires can exit freely!

Drive wire contra weight Safety wire push spring

ON/Locked

OFF/Open

Fig. 11

2.5 Installation of drive and safety wire in work cage

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 63 64

Comments to this Manuals

No comments

Avanti CF103 User Manual Page 51

Comments to this Manuals

Related products and manuals for Unknown Avanti CF103